Product Overview

SICOM2024M is a layer 2 managed industrial Ethernet switch designed to operate reliably in electrically harsh and climatically demanding utility substation and industrial environments, It supports up to 2 100Base-X SFP ports and 24 fast Ethernet RJ45 ports. SICOM2024M is a 19-inch 1U rack mountable device and allows front and rear panel mounting. SICOM2024M supports many Layer 2 software features such as port, VLAN, multicast, QoS, RSTP. It supports Console, Telnet, Web management and network management software based on SNMP. At present, the product is widely used at the intelligent substation and many other industrial communication systems.

Key Features
  • Supports max 2 100Base-X SFP ports and 24 fast Ethernet RJ45 ports
  • Supports DT-Ring, STP/RSTP for network redundancy
  • Supports IP/MAC address conflict alarm, Power alarm, Port alarm, Ring alarm
  • Supports SFP Digital Diagnostics Monitoring
  • Allow front and rear panel mounting
  • IP40 protection class
  • CE, FCC certification
Specifications
Software FunctionsSwitching FunctionSupports VLAN and PVLAN.
Supports GVRP.
Supports port aggregation.
Supports flow control.
Supports port rate limit.
Supports broadcast storm suppression.
Redundancy ProtocolSupports DT-Ring, DT-Ring+, and DT-VLAN and the recovery time<50 ms.
Supports STP/RSTP.
Multicast ProtocolSupports IGMP snooping.
Supports GMRP.
Supports static multicast.
Network SecuritySupports port isolate.
Service Quality ManagementSupports ACL
Supports 802.1p(CoS),DSCP
Supports SP and WRR queuing.
Management & MaintenanceSupports Console, Telnet, and Web management methods.
Supports SNMPv1/v2c and can managed by Kyvision.
Supports software update over FTP.
Supports IP/MAC address conflict alarm, Memory/CPU usage alarm, Power alarm, Port alarm, Port traffic alarm, CRC error and packet lose alarm, SFP port RX power alarm and TX power alarm, Ring alarm.
Supports DDM (SFP port).
Supports loop detection.
Supports CRC protection.
Supports RMON.
Supports port mirroring.
Supports Syslog.
Supports LLDP.
Supports Link-check.
IP Address ManagementSupports DHCP Server/Client.
Supports ARP.
Clock ManagementSupports SNTP Server/Client.
Product SpecificationsStandardIEEE 802.3i(10Base-T)
IEEE 802.3u(100Base-TX and 100Base-FX)
IEEE 802.3x(flow control)
IEEE 802.1p(priority)
IEEE 802.1Q(VLAN)
IEEE 802.1w(RSTP)
Switch PropertiesPriority queue: 4
Number of VLANs: 256
VLAN ID: 1-4093
Number of multicast groups: 256
MAC table: 8K
Packet buffer: 2Mbit
Packet forwarding rate: 7.7Mpps
Switching delay:<10μs
InterfaceFast Ethernet ports:
100Base-X SFP port
10/100Base-T(X), RJ45 port
Console port: RS232,RJ45
Alarm contact: 3-pin 5.08mm-spacing plug-in terminal block, 250 VAC/220 VDC Max, 2 A Max, 60 W Max
LEDED on front panel
Running LED: Run
Power LED: PWR1,PWR2
Port LED: Link/ACT, Speed
LED on rear panel
Interface LED: Link/ACT, Speed (RJ45 port); Link/ACT(Fiber port)
Power RequirementsPower input:
24-48VDC(18-72VDC)
100-240VAC,50/60Hz;110-220VDC (85-264VAC/77-300VDC)
Power terminal: 5-pin 5.08 mm-spacing plug-in terminal block
Power consumption:<16.8W
Overload protection: Support
Reverse connection protection: Support
Redundancy protection: Support
Physical CharacteristicsHousing: Metal
Cooling: Natural cooling, fanless
Protection Class: IP40
Dimensions(WxHxD): 482.6mm×44mm×185mm
Weight: 2.5Kg
Mounting: 19 inch 1U rack mounting
Environmental LimitsOperating temperature: -40°C to +85°C
Storage temperature: -40°C to +85°C
Ambient Relative Humidity: 5% - 95% (non-condensing)
Quality AssuranceMTBF: 338566h
Warranty: 5 years
ApprovalsCE, FCC
Industry StandardEMI:
FCC CFR47 Part 15,EN55022/CISPR22,Class A

EMS:
IEC61000-4-2(ESD) ±8kV(contact),±15kV(air)
IEC61000-4-3(RS) 10V/m(80MHz-2GHz)
IEC61000-4-4(EFT) Power Port:±4kV;Data Port:±2kV
IEC61000-4-5(Surge) Power Port:±2kV/DM,±4kV/CM;Data Port:±2kV
IEC61000-4-6(CS) 3V(10kHz-150kHz);10V(150kHz-80MHz)
IEC61000-4-8(power frequency magnetic field) 100A/m(cont.),1000A/m(1s-3s)
IEC61000-4-9(pulsed magnetic field) 1000A/m
IEC61000-4-10(damped oscillation) 100A/m
IEC61000-4-12(oscillatory wave) 2.5kV/CM,1kV/DM
IEC61000-4-16(common mode conduction) 30V(cont.),300V(1s)

Machinery:
IEC60068-2-6 (vibration),
IEC60068-2-27 (shock),
IEC60068-2-32 (free fall)
Mechanical Drawing
Ordering Information
SICOM2024M-Ports- PS1-PS2
Code definitionCode selection
Ports:2SFP24T=2×100Base-X SFP ports; 24×10/100Base-T(X) RJ45 ports
24T=24×10/100Base-T(X) RJ45 ports
PS1-PS2: power inputHV-HV=100-240VAC,50/60Hz;110-220VDC(85-264VAC/77-300VDC), redundant power inputs
HV=100-240VAC,50/60Hz;110-220VDC(85-264VAC/77-300VDC), single power input
L2-L2=24-48VDC(18-72VDC), redundant power inputs
L2=24-48VDC(18-72VDC), single power input
Accessories ModelDescription
SFP moduleSee the selection table of industrial gigabit SFP module.
DT-FCZ-RJ45-01Single-port RJ45 dust plug
Downloads
NameTypeFile Size
Kyland_SICOM2024M_Datasheet
Datasheet
Download
Unmanaged/managed

Layer 2 Managed Switches

Installation

Rackmount Ethernet Switches

IP Class

IP40

Operation Temperature

-40°C ~ 85°C

Interface

Gigabit/100M

Network Interface

Fiber Connectors, RJ45 Connectors

Number of Ports

17 – 28

Power Supply

24-48V DC, 220V AC

Certificate

CE/FCC

Related products

×
Please fill in the form to download the PDF file.
Hidden
Hidden
×
Please fill in the form to signup for the newsletter.
Name(Required)
Select the fields to be shown. Others will be hidden. Drag and drop to rearrange the order.
  • Image
  • SKU
  • CPU
  • pa_height
  • Memory
  • Storage
  • Unmanaged/managed
  • Installation
  • Operation Temperature
  • Interface
  • Network Interface
  • Number of Ports
  • Power Supply
  • Certificate
  • Connectors
  • CPU
  • Display Port
  • Expansion
  • Features
  • Highlight Functions
  • I/O
  • IP Class
  • Memory
  • Port Numbers
  • Redundancy
  • Serial Port
  • Storage
  • USB
Compare